DIY Fabric Scrap Garland

Posted by MrKate on

MrKate_DIWhyNot_4thOfJuly-38

I made this whimsical, fabric scrap garland for Fourth of July, but really, it can be made with any colors to celebrate any holiday or festivity!

To watch the video this DIY was featured in, check out DIWhyNot Fourth of July Party

MrKate_DIWhyNot_4thOfJuly-2

Prep It:

  • different colored fabric (I used cotton canvas and linen)
  • scissors
  • twine

MrKate_DIWhyNot_4thOfJuly-15

MrKate_DIWhyNot_4thOfJuly-17

MrKate_DIWhyNot_4thOfJuly-19

MrKate_DIWhyNot_4thOfJuly-20

MrKate_DIWhyNot_4thOfJuly-50

Do It!:

  1. Make a cut in your fabric about 2 to 3 inches wide and tear along the width of the fabric bolt.
  2. Tie the fabric strips to your twine.
  3. Tie the twine ends up to your overhang (or tape up to the ceiling) - You may need to trim your strips of fabric at this point.
  4. Repeat until you feel you have enough garlands to create a full and lively scene!

MrKate_DIWhyNot_4thOfJuly-36

MrKate_DIWhyNot_4thOfJuly-39

← Older Post Newer Post →

Read

Raised Garden Bed DIY

Raised Garden Bed DIY

Materials: - Bottomless galvanized utility tub - Spray paint (made for metal surfaces) - Vegetables and herbs (from seedlings or seeds) - Soil (preferably a...

DIY Project: Minimalist Side Table

DIY Project: Minimalist Side Table

When making over this bedroom we wanted to go for a tranquil vibe and to achieve this we had to keep the elements neutral and...